{ "id": "stainless-steel-drain-cover-15cm-2-pack", "sku": "stainless-steel-drain-cover-15cm-2-pack", "title": "Stainless Steel Swirl Drain Cover 15cm (2 Pack)", "slug": "stainless-steel-drain-cover-15cm-2-pack", "price": 15.99, "currency": "GBP", "availability": "in_stock", "category": "floor-drain-covers", "category_label": "Outdoor Drain Covers & Gully Grids", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "100 g", "images": [ "https://ezydrains.co.uk/dropship-images/floor-drain-covers/stainless-steel-drain-cover-15cm-2-pack/main-stainless-steel-drain-cover-15cm-2-pack.jpg", "https://ezydrains.co.uk/dropship-images/floor-drain-covers/stainless-steel-drain-cover-15cm-2-pack/stainless-steel-drain-cover-15cm-2-pack-2.jpg", "https://ezydrains.co.uk/dropship-images/floor-drain-covers/stainless-steel-drain-cover-15cm-2-pack/stainless-steel-drain-cover-15cm-2-pack-3.jpg", "https://ezydrains.co.uk/dropship-images/floor-drain-covers/stainless-steel-drain-cover-15cm-2-pack/stainless-steel-drain-cover-15cm-2-pack-4.jpg", "https://ezydrains.co.uk/dropship-images/floor-drain-covers/stainless-steel-drain-cover-15cm-2-pack/stainless-steel-drain-cover-15cm-2-pack-5.jpg" ], "description_short": "Two rustproof stainless steel covers with a swirl pattern, sized for a 15cm opening, easy to lift out, rinse and drop straight back in.", "description": "The problem nobody notices until it is too late\n\nBlocked drains almost never announce themselves. The shower takes a second longer to clear. The water around the outside gully sits for a minute after rain instead of vanishing. Then one wet week in October the whole thing backs up, and you are outside in the dark pulling a rope of wet leaves out of a pipe.\n\nNearly all of it comes from the same handful of things. Hair in bathrooms. Food scraps and grease in kitchens. Leaves, moss, soil and grit outside. None of those belong in the pipe, and none of them need to get there. A cover across the opening catches them where you can see them and sweep them off in seconds.\n\nThat is the whole idea behind a stainless steel drain cover 15cm 2 pack. It is not clever and it is not expensive. It just stops the stuff that causes blockages from getting into the part of the system you cannot reach.\n\nHow a swirl pattern cover works\n\nLook at the surface and you see a spiral of cut openings rather than a flat grid of squares. The openings are wide enough that water drops through without hesitating, but narrow enough that a leaf, a clump of hair or a bit of gravel sits on top instead of going down.\n\nThe pattern earns its keep in two ways. Practically, curved openings tend to shed debris when you sweep across them, because there are fewer straight dead ends for a leaf stem to wedge into. Visually, it looks like a deliberate piece of hardware rather than a bit of plastic grating. In a tiled bathroom or on a smart patio, that matters more than people admit.\n\nHeight matters too. These covers are 0.2cm tall. That is about two millimetres, which is barely a lip. A cover that stands proud of the floor is something you kick, something a mop catches on, and something that collects dirt around its edge. A low profile cover sits down and gets forgotten about, which is exactly what you want.\n\nWhy stainless steel instead of plastic\n\nPlastic covers are cheaper, and for a drain in a dry garage that never sees sun or frost they are fine. Everywhere else they tend to have a shelf life. UV light makes outdoor plastic brittle, frost finishes the job, and one footstep on a cold morning cracks it. Indoors, plastic yellows and stains where it sits in standing water.\n\nMild steel and iron go the other way. They look solid for a season, then rust streaks appear on the tile or paving around them, and the rust marks are harder to remove than the cover was to buy.\n\nStainless steel sidesteps both problems. It resists the corrosion that ruins ordinary steel in permanently damp conditions, and it does not go brittle in cold weather. There is no coating to chip, no paint to flake and nothing to reseal each year. If you want the best rustproof drain cover for a shower waste or an outside gully, steel with a stainless grade is the sensible starting point.\n\nIt also wipes clean, which is why stainless turns up in commercial kitchens and food prep areas. A surface that does not absorb anything is a surface you can genuinely get clean with soap and water.\n\nGetting the size right\n\nThis is where most drain cover purchases go wrong, so slow down for a paragraph.\n\nThese covers are made for a 15 centimetre opening. The maker gives it twice, once as the fits hole size and once as the compatible groove diameter, and both say 15cm. The cover itself measures 15cm wide.\n\nMeasure the open hole, not the frame around it. Many drains have a concrete collar, a tiled border or a plastic surround that is noticeably wider than the hole underneath. If you measure the outer edge, you will order something too big and be annoyed when it arrives. Put the tape across the gap the water actually falls through.\n\nFor a square drain, measure twice at right angles. Older drains settle and are not always true. If your two measurements differ by more than a few millimetres, work from the larger one.\n\nIf you are between sizes, a cover a touch wider than the hole will still sit over the top and do its job, as long as the surrounding surface is flat. A cover narrower than the hole will fall in, which helps nobody.\n\nWho these suit\n\nHouseholds with long hair in the family get the most obvious benefit. A bathroom gully with a cover across it turns a recurring plumbing job into a weekly rinse.\n\nPeople with trees near the house are the other big group. Autumn leaves are the single most common cause of outside drains backing up, and a cover across the gully is the simplest possible answer. Anyone searching for the best outdoor drain cover is usually solving exactly this.\n\nRenters like them because nothing is fixed, drilled or glued. The cover drops on, does its work for the length of the tenancy, and leaves with you.\n\nThey also work well in utility rooms, garden rooms, garage floor drains, pool surrounds and kitchen floor drains. Anywhere water goes down through an opening in the floor, the same logic applies.\n\nWho they do not suit is worth saying plainly. These are thin covers for foot traffic. They are not load rated grates, so they do not belong under a car, a trailer or a heavy trolley. For a driveway crossing, buy a proper load rated gully grate and fix it down.\n\nLiving with them\n\nThe honest answer on maintenance is that it is trivial, but it only works if you actually do it.\n\nIndoors, lift the cover once a week, tip off whatever has gathered, rinse it under the tap and put it back. Thirty seconds, no tools. For a greasy kitchen drain, warm water and washing up liquid cuts the film quickly.\n\nOutdoors, check after heavy rain and more often through autumn. A cover piled high with wet leaves stops draining, which defeats the point. Sweeping across it with a stiff brush is often enough without even lifting it.\n\nAvoid wire wool, wire brushes, bleach and scouring powder. They scratch the finish and leave the surface dull and more prone to holding dirt. A soft cloth or sponge keeps the shine for years.\n\nOne quiet advantage of a two pack is that you can rotate. Pull one out for a proper soak and clean, drop the spare in its place, and the drain is never left open. That small bit of convenience is usually the difference between a cover that gets cleaned and one that sits forgotten under a mat of sludge.\n\nThe short version\n\nA drain cover is one of the few household buys where the cheap option genuinely solves the problem. Stainless steel handles damp without rusting or going brittle. The swirl openings let water through and hold back the leaves, hair and grit that cause blockages. The 0.2cm height keeps it flush enough to walk over without noticing.\n\nMeasure your opening across the hole itself, confirm it is close to 15 centimetres, and this two pack covers a shower and an outside gully, or two yard drains, in one go. Give it a rinse now and then and it quietly saves you the job you were dreading.", "llm_summary": "The LIME SHOP stainless steel swirl drain cover is sold as a two pack. Each cover measures 15cm wide by 0.2cm high and is made to fit a 15 centimetre hole or groove. The material is stainless steel in a silver finish with a swirl pattern that allows water to drain while holding back leaves, hair and grit. Item weight is 100 grams and the country of origin is listed as the United Kingdom. The model number is 12 and the manufacturer is listed as Medipaq. The covers suit indoor and outdoor drains such as showers, kitchen floors, patios and yard gullies. No fixings, warranty terms, colour options beyond silver, or installation hardware are specified in the maker's details.", "returnable": true, "return_policy": "14-day right to cancel from delivery under the Consumer Contracts Regulations 2013, buyer pays return postage; the refund may be reduced if the item has been used beyond normal handling; Consumer Rights Act 2015 rights for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.co.uk/stainless-steel-drain-cover-15cm-2-pack/", "canonical_url": "https://ezydrains.co.uk/stainless-steel-drain-cover-15cm-2-pack/", "json_url": "https://ezydrains.co.uk/api/products/stainless-steel-drain-cover-15cm-2-pack.json", "updated_at": "2026-10-11" }