{
  "id": "square-gully-grid-150mm",
  "sku": "square-gully-grid-150mm",
  "title": "150mm Square Gully Grid Drain Cover",
  "slug": "square-gully-grid-150mm",
  "price": 8.99,
  "currency": "GBP",
  "availability": "in_stock",
  "category": "floor-drain-covers",
  "category_label": "Outdoor Drain Covers & Gully Grids",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": null,
  "images": [
    "https://ezydrains.co.uk/dropship-images/floor-drain-covers/square-gully-grid-150mm/main-square-gully-grid-150mm.jpg",
    "https://ezydrains.co.uk/dropship-images/floor-drain-covers/square-gully-grid-150mm/square-gully-grid-150mm-2.jpg",
    "https://ezydrains.co.uk/dropship-images/floor-drain-covers/square-gully-grid-150mm/square-gully-grid-150mm-3.jpg",
    "https://ezydrains.co.uk/dropship-images/floor-drain-covers/square-gully-grid-150mm/square-gully-grid-150mm-4.jpg",
    "https://ezydrains.co.uk/dropship-images/floor-drain-covers/square-gully-grid-150mm/square-gully-grid-150mm-5.jpg"
  ],
  "description_short": "Moulded in rigid PVC with rounded corners and an open grid face, it sits flat over the opening, lets water through fast, and lifts out in a second for cleaning.",
  "description": "The small part that stops a big mess\n\nA blocked drain almost never announces itself. One autumn afternoon the leaves come off the tree out front, a few of them wash down the path, and they drop into an open gully because nothing is covering it. They settle in the trap. Over the next few weeks, grit from the roof, moss off the render and the odd crisp packet join them. By the time you notice, water is sitting on the path after every shower and you are standing outside with a pair of gloves and a bent coat hanger.\n\nA square gully grid 150mm is the cheap, boring fix that stops this happening in the first place. It sits over the mouth of the drain and holds the solid stuff on the surface, where you can see it and sweep it up, while rainwater carries on through. That is the whole idea. There is nothing clever going on, but the difference between a covered gully and an open one over five years is substantial.\n\nHow a gully grid actually works\n\nRainwater drainage around a house tends to end at a gully, a small hopper set into the ground at the base of a downpipe or beside a wall. Water from the roof and the surrounding paving runs into the hopper, through a trap, and into the underground pipe. The trap holds a plug of water that stops drain gases coming back up.\n\nThe weak point is the top. An open hopper takes everything, not just water. A grid covers it with a pattern of openings big enough to pass a heavy downpour but too small for leaves, twigs and loose grit. Debris collects on top instead of inside, so when you want to clear it you are brushing a flat surface rather than fishing around in a trap full of sludge.\n\nThis one is designed to fit a 150mm by 150mm square hopper, which is the common domestic size. Because it is meant to sit inside the opening rather than on top, the grid itself measures slightly under that figure. That is intentional. A grid that is exactly 150mm would not go in.\n\nWho needs one\n\nIf you have a downpipe that ends in a square drain at ground level, you are the obvious candidate. The same goes for patio drains, side alleys, garage aprons and the little gully next to the back door that collects runoff from the kitchen roof.\n\nThere are a few situations where a cover earns its keep faster than usual. Overhanging trees are the big one, especially anything that drops in volume like sycamore, birch or lime. Gravel paths next to the drain are another, because loose stones migrate towards water. Older properties with original clay pipework also benefit, since those pipes have more joints and rougher internal surfaces for debris to catch on.\n\nIf your current grate has rusted to lace, a plastic replacement drain grate is the straightforward swap. Steel grates in constant contact with rainwater have a finite life. PVC does not have the same problem.\n\nWhy plastic rather than metal\n\nThe instinct is often that metal must be tougher. For a load-bearing grating in a driveway, that is true, and you should buy something rated for vehicle weight. For a path or patio gully, plastic has real advantages.\n\nIt will not rust. That is the main one. A PVC gully grate spends its life wet and does not care. It is also light, and that matters more than people expect. The reason grids do not get cleaned is that cleaning them is annoying. A 60 gram grid you can lift with two fingers removes the excuse entirely. A heavy cast grate rusted into its seat does not get lifted until there is a problem.\n\nPlastic also will not stain the paving around it with rust runs, which anyone who has had an old metal grate on light-coloured stone will appreciate.\n\nThe trade-off is strength. This is not a load-rated part. Keep it to foot traffic and off anywhere a car parks or turns.\n\nHow to choose the right grid\n\nStart with the tape measure. Measure the inside of the hopper opening, wall to wall, and do it in both directions. Old hoppers settle and can be slightly out of square, so if one reading is 150mm and the other is 147mm you want to know before you order rather than after.\n\nCheck the shape too. A square grid will not sit properly in a round opening. It will tip, leave gaps at the edges and let debris past, which defeats the point. If your gully is circular, buy a circular grate sized to the diameter.\n\nThen look at depth. Most hoppers have a small rebate or ledge for the grid to rest on. If yours has been filled with concrete over the years, or the ledge has broken away, the grid may sit lower or higher than ideal. A small amount of movement is normal. A grid that rocks badly needs the seat tidying up first.\n\nFinally, count your drains. People buy one, fit it, then realise there are three more gullies around the house. Walk the perimeter before you order.\n\nFitting it\n\nThere is not much to this. Clear out whatever is currently in the gully, which is usually the unpleasant part. Scoop the debris with a trowel into a bucket, not down the drain. Hose the hopper rim clean so the grid has a flat surface to sit on.\n\nLower the grid in and check it sits level. Press each corner in turn to see if it rocks. If it does, look for a lump of grit or old mortar under one edge. Once it sits flat, you are done. No tools, no fixings, no drilling.\n\nGive it a quick test with a bucket of water or the hose. Water should disappear through the openings without pooling.\n\nKeeping it working\n\nThe maintenance routine is short. After heavy wind or rain, glance at the drain. If there is a mat of leaves on the grid, lift it, tip the debris into the green bin and drop it back. Thirty seconds.\n\nTwo or three times a year, do a proper clean. Take the grid out, brush both faces with a stiff brush and warm soapy water, rinse it thoroughly and let any detergent wash away rather than going down the drain. While the grid is out, have a look inside the hopper. If there is silt building up, scoop it now while it is easy.\n\nMoss and algae are the usual culprits for narrowing the openings on a shaded drain. A brush handles it. If you use any cleaning product, rinse well before refitting.\n\nAutumn is when the work concentrates. Under a tree you may be clearing weekly for six weeks, then nothing until the following year. That is still far less effort than rodding a blocked pipe once.\n\nA few things it will not do\n\nWorth being straight about the limits. A grid will not stop smells. Drain odour comes from a dry or cracked trap and needs attention further down. It will not stop fine silt, because the openings have to stay open enough for water. It is not pest proofing and it is not rated for vehicles.\n\nWhat it does do is keep the bulk of surface debris out of your drainage, and that is the thing that causes most domestic blockages.\n\nThe short version\n\nIf you have a 150mm square drain hopper sitting open, cover it. Measure the inside of the opening in both directions, check it is actually square, and drop a grid in. It takes a minute to fit, costs less than a takeaway and removes the most common cause of a blocked gully.\n\nClean it when it looks clogged, give it a proper scrub a couple of times a year, and keep cars off it. That is the entire job.",
  "llm_summary": "The 150mm Square Gully Grid is a drop-in PVC drain cover from fiXte, designed to fit a standard 150mm x 150mm square drain hopper. The actual grid is slightly smaller than the nominal size so it seats inside the opening rather than resting on top. It has a square shape with rounded corners and an open grid face that lets rainwater pass through while holding back leaves, twigs and larger debris. The package measures 14.9 x 14.8 x 1.9 cm and weighs 60 g, and one grid is supplied. No fixings are needed, so it lifts out by hand for cleaning. Colour, country of origin and product weight are not specified by the maker.",
  "returnable": true,
  "return_policy": "14-day right to cancel from delivery under the Consumer Contracts Regulations 2013, buyer pays return postage; the refund may be reduced if the item has been used beyond normal handling; Consumer Rights Act 2015 rights for faulty goods. Return postage on faulty goods is ours.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "EzyDrains Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://ezydrains.co.uk/square-gully-grid-150mm/",
  "canonical_url": "https://ezydrains.co.uk/square-gully-grid-150mm/",
  "json_url": "https://ezydrains.co.uk/api/products/square-gully-grid-150mm.json",
  "updated_at": "2026-10-11"
}