{ "id": "shower-drain-cover-chrome-2-pack", "sku": "shower-drain-cover-chrome-2-pack", "title": "Chrome Shower Drain Cover and Trap Cup, 2 Pack", "slug": "shower-drain-cover-chrome-2-pack", "price": 17.99, "currency": "GBP", "availability": "in_stock", "category": "shower-grates", "category_label": "Shower Drain Covers & Linear Drains", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "320 g", "images": [ "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/main-shower-drain-cover-chrome-2-pack.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-2.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-3.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-4.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-5.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-6.jpg", "https://ezydrains.co.uk/dropship-images/shower-grates/shower-drain-cover-chrome-2-pack/shower-drain-cover-chrome-2-pack-7.jpg" ], "description_short": "Each set includes a chrome-finish top cover and a lift-out cup that catches hair and grit, so cleaning the drain means rinsing a small basket instead of poking around inside the pipe.", "description": "The problem nobody notices until the water pools\n\nA shower drain is one of those parts of a house that works silently for years and then stops. Usually it does not fail outright. It just gets slower. You notice you are standing in an inch of water by the end of a shower, and you tell yourself you will deal with it later.\n\nThen there is the look of it. Chrome dulls. Limescale builds around the rim. Hair wraps around whatever grid is in place and no amount of wiping makes it look clean, because the stain is in the metal now, not on it.\n\nBoth of those problems have the same cheap fix, and it is not a plumber. It is a new cover and cup for the waste you already have.\n\nHow a two-part drain cover actually works\n\nThe design is simple once you have seen it apart. There are two pieces.\n\nThe lower piece is a cup. It drops into the waste opening and sits inside it like a small bucket with holes. Water runs through it and down into the pipe. Hair, soap scum and the bits of grit that come off your feet stay in the cup.\n\nThe upper piece is the plate you see from the shower floor. It has a chrome face so it blends with your taps and valve, and it covers the cup so you are not looking at a basket of hair every morning.\n\nWhen it is time to clean, you pull the plate off with your fingers, lift the cup out, and tip it into the bin. Rinse, put it back, done. Compare that with reaching into a pipe with a hooked wire and you can see why this style took over.\n\nThe really useful part is that the debris never gets past the cup. Blockages form where you can see them and reach them, not three feet down a pipe inside a wall.\n\nWho this suits\n\nThis kind of replacement set earns its place in a few situations.\n\nHouseholds with long hair get the most out of it. Hair is the single biggest cause of shower blockages, and a cup is the most effective physical barrier you can put in the way of it without buying some gadget that sits on top and looks awful.\n\nOlder houses benefit too. If your shower waste is twenty years old, the original cover is probably pitted or stained, and the plastic parts have gone brittle. Replacing just the visible components brings the whole tray back to looking cared for.\n\nLandlords and anyone doing a quick refresh will like the two pack. Two bathrooms done in one go, or one done now and a spare on the shelf.\n\nAnd then there is the simple case, your old cover broke or went missing. You do not need a whole new waste assembly for that. You need the top parts.\n\nGetting the size right, the only hard bit\n\nThis is where people go wrong, so it deserves plain advice.\n\nShower wastes are not standard across manufacturers. Two trays that look identical can have openings that differ by several millimetres, and a few millimetres is the difference between a cover that sits flush and one that rocks or drops through.\n\nBefore ordering, take the old cup and lid out. Measure three things. First, the diameter of the opening in the tray. Second, the width of the top plate you currently have, since the new plate needs to cover the hole with a little overlap. Third, the depth available below the opening, because the cup has to sit fully down without hitting the trap below.\n\nWrite those numbers down and compare them with the figures on this page. If the measurements are close but not exact, assume it will not fit rather than hoping. A return is more hassle than a careful measurement.\n\nOne more tip. If your existing cup is cemented in with old silicone, that is not a sign of a special fitting. It is usually somebody in the past trying to stop a rattle. Scrape the sealant away, clean the recess, and the replacement should drop in normally.\n\nFitting it\n\nAssuming the sizes match, this is a five minute job.\n\nLift out the old lid. Lift out the old cup. If either is stuck, work a flat blade gently around the edge rather than levering hard against the tray, because trays chip.\n\nClean the recess properly while it is open. This is your one easy chance to clear out whatever has settled around the lip of the waste. A cloth and some warm soapy water is enough.\n\nDrop the new cup in and check it seats flat. Place the plate on top. Run the shower for ten seconds and watch the water go. If it drains at normal speed and nothing rocks underfoot, you are finished.\n\nKeeping it clean and keeping it bright\n\nTwo separate jobs here, and both are quick.\n\nThe cup wants emptying every week or two. If several people use the shower, make it weekly. The whole benefit of this design is that it catches things, so it fills. Tip it out, rinse it under a tap, put it back. Leave it too long and you get the slow drain and the faint smell that people blame on the pipe.\n\nThe chrome face wants a different approach. Wipe it with a soft damp cloth and dry it off. Water spotting and limescale are the two enemies, and drying after cleaning deals with most of it. If limescale has built up, a mild descaler used sparingly and rinsed off is fine.\n\nWhat to stay away from, abrasive pads, scouring powder, heavy bleach gels and solvent cleaners. Chrome plating is a thin layer. Once you scratch through or cloud it, there is no fixing it, and you are back to buying another cover.\n\nA word on expectations\n\nA drain cover is a sensible, modest product and it is worth being honest about what it does and does not do.\n\nIt catches hair and debris, it tidies the look of the tray, and it makes cleaning the drain a job you do not dread. It does not clear an existing blockage further down the pipe, and it does not replace the water seal in your trap. If you fit a clean new cover and the drain is still slow, or there is still a smell, the problem is below and needs separate attention.\n\nAlso worth saying, material and country of origin are not stated by the maker for this set, so we are not going to claim them. What is confirmed is the brand, the part number, the included components, the colour and the packaged measurements.\n\nThe short version\n\nIf your shower drains slowly or the cover looks past it, you almost certainly do not need new pipework. You need the top parts replaced, and a two-piece cover with a lift-out cup is the version that makes future cleaning easy.\n\nMeasure your existing waste first, both the width of the opening and the depth below it. That one check decides whether the fit is right.\n\nAfter that it is simple. Drop the cup in, press the plate on, empty the cup every week or two, and wipe the chrome with a soft cloth rather than anything scratchy. With two sets in the pack, you have one for now and one for later.", "llm_summary": "A two pack of chrome-finish shower drain covers from ASelected, part number ASUKVC-2023090820. Each set is a two-piece design, a chrome top plate over a removable cup that catches hair and debris before it enters the waste pipe. The cover pulls off by hand and the cup lifts out for rinsing, so no tools are needed for routine cleaning. Listed colour is silver. Packaged dimensions are 11.5 x 6.3 x 9.5 cm with a shipped weight of 320 g. Included components are two shower drain covers. Material, country of origin and a formal warranty are not specified by the maker. Buyers should measure their existing waste opening and available depth before ordering to confirm fit.", "returnable": true, "return_policy": "14-day right to cancel from delivery under the Consumer Contracts Regulations 2013, buyer pays return postage; the refund may be reduced if the item has been used beyond normal handling; Consumer Rights Act 2015 rights for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.co.uk/shower-drain-cover-chrome-2-pack/", "canonical_url": "https://ezydrains.co.uk/shower-drain-cover-chrome-2-pack/", "json_url": "https://ezydrains.co.uk/api/products/shower-drain-cover-chrome-2-pack.json", "updated_at": "2026-10-11" }